Here we go people! 1.1.3 is now achievable on your jailbroken/unlocked iPhone running firmware 1.1.1 or 1.1.2
It is recommended you uninstall ALL your previous applications on the iPhone before doing this upgrade since the application installation directory has changed in 1.1.3. Re-install them once on 1.1.3 to avoid errors and conflicts.
Note: This Jailbreak method is now outdated as Nate has not updated the issues with this method. Use this method as an alternative to this guide.
What you need:
- Download iBrickr Special 1.1.3 Jailbreak Edition from: here
- iPhone 1.1.3 Firmware
Step One
You must have a 1.1.1 or 1.1.2 jailbroken phone with Installer.app installed.
Step Two
Connect your iPhone to the computer
Step Three
Extract iBrickr 1.1.3 from the file(ibrickr-jb113.zip) we downloaded earlier. Make sure you extract it to the desktop!
Step Four
A folder will be extracted called ibrickr-jb113. If you have Vista/2000 from this folder right click ibrickr.exe then select properties from the popup menu. Otherwise if you have XP procede to Step 6.
Step Five
Click the Compatibility tab and check Run this program in compatibility mode for:. Then select Windows XP (Service Pack 2 from the drop down. Finally click the Apply button.
Step Six
Now double click ibrickr.exe to launch the application.
Step Seven
When iBrickr launches click the Check my phone! button.
Step Eight
You will get a message telling you which firmware version you are currently on. It will also let you know if your phone can be upgraded to 1.1.3 jailbroken. If it can, click the Do it button.
Step Nine
iBrickr will download the necessary files. You will then be presented with the option to find the 1.1.3 firmware on your disk or to download it from Apple. Click the Download it from Apple button or choose the find on disk option if you downloaded 1.1.3 earlier.
Step Ten
Once the firmware has been downloaded you will be prompted to confirm the beginning of installation. Click the Do you have to ask? button to continue.
Step Eleven
Again once everything is ready you will be asked to confirm installation. Click the Ready to go! button to begin.
Step Twelve
iBrickr has now completed its part of the job.
Step Thirteen
Press to launch Installer from the Springboard.
Step Fourteen
If you get prompted for an Installer Update click the Update Now button.
Step Fifteen
If Installer was updated click the Ok button.
Step Sixteen
Press to launch Installer from your Springboard again. (If you had to update).
Step Seventeen
If asked to Donate click the Donate Later button for now.
Step Eighteen
Press to select the Install tab at the bottom of the screen.
Step Nineteen
Press to select System from the list of Categories.
Step Twenty
Press to select 1.1.3 soft upgrade from the list of Packages.
Step Twenty One
Press the Install button at the top right of the screen.
Step Twenty Two
Press the large Install button that appears.
Your iPhone will install the Software Update package and then reboot. This takes a few minutes and it looks like the phone is stuck at the “installing package” bar and at the spinning circle later on, but do not touch the phone during this time it will reboot on its own when the process is done.
At reboot you get a “Edit Home Screen” message. Click the Dismiss button and you are now on 1.1.3:
After getting on 1.1.3 make sure you refresh the sources in installer and update installer and BSD subsystem 
Making “Locate Me” feature in Google app work:
Get into installer and install the “Locate Me” Application found under utilities. Run this app and once it finds your location your google maps then the locater in the app also starts to work. If you do a hard reboot of the phone then this gets reset and you have to run the installer locate me app again.
Hybrid View Now works by using the guide above:
Now for some housekeeping :
IF YOU ARE ONE OF THOSE THAT UPGRADED WITHOUT UNINSTALLING THEM FIRST AND NOW HAVE TROUBLE WITH THE APPS, FOLLOW THESE INSTRUCTIONS:
1) Install MobileFinder (if you already had it, uninstall it and install again)
2) Launch MobileFinder from the springboard.
3) Tap “Settings” and turn on “System File Access”
4) Tap “Finder” then “Up”. You should be in the file system now.
5) Navigate to private/var/root/Library/Installer/ and delete LocalPackages.plist
6) Reinstall Community Sources, BSD subsystem and OpenSSH (The username is mobile and the password is alpine).
7) Reinstall the rest of your 3rd party apps.
Getting back some space:
You should also delete the 300+MB file (113_upgrade_image.bin) from /var/root/media/softupdate that was used during the jailbreak. SSH into your iPhone and delete that file. Alternatively you can also run the cleanup package that has recently shown up in installer under the system category
Turning off SSH:
Once you are done using SSH, don’t forget to turn it off to save battery life. Download this app and use it to turn SSH on and off. To use it SSH into your phone and drop the extracted folder SSH.app into the applications directory.
Questions / problems while running the 1.1.3 soft upgrade from Installer:
I don’t see the “1.1.3 soft upgrade” package in my Installer.
Make sure you have the “Community Sources” package installed, and hit “Refresh” in the Sources tab. It should show up under “All packages”.
When I install the package, it says “Main script execution error”. When I hit OK it looks like it crashed.
This happens to some people, but it doesn’t appear to affect operation. Your phone should update in about 10 minutes and reboot by itself. If that doesn’t happen, you’ll need to restore and try again.
When I install the package, it completely crashes my phone with the progress bar at halfway.
This is normal. It’s updating your phone - don’t touch it! Just leave it plugged in and let it do its thing. It’s okay if your screen turns off too.
80 Comments so far
Skip to comment form
Carlos Mtz January 25th, 2008 at 12:23 am
(Quote)
I have a 1.1.2 jailbreak and unlock with AnySim , after this upgrade to 1.1.3 , can i still using a non AT&T Sim???
labrat January 25th, 2008 at 2:00 am
(Quote)
Yes it will work
Wiroj January 25th, 2008 at 5:26 am
(Quote)
Everything work fine until Step Twenty Two. I have error “Main Script Execution Fail” so i try to manual execute in SSH mode but got a message Permission deny.
iPhone 4 GB with 1.1.1 Firmware
Wiroj January 25th, 2008 at 5:51 am
(Quote)
# bash upgrade.sh
mount: /var: unknown special file or file system.
upgrade.sh: line 5: /var/root/Media/softupgrade/mount: Permission denied
upgrade.sh: line 6: /var/root/Media/softupgrade/mkdir: Permission denied
upgrade.sh: line 7: /var/root/Media/softupgrade/ln: Permission denied
upgrade.sh: line 8: /var/root/Media/softupgrade/ln: Permission denied
upgrade.sh: line 9: /var/root/Media/softupgrade/chmod: Permission denied
upgrade.sh: line 10: /var/root/Media/softupgrade/mkdir: Permission denied
upgrade.sh: line 11: /var/root/Media/softupgrade/ln: Permission denied
upgrade.sh: line 12: /var/root/Media/softupgrade/ln: Permission denied
upgrade.sh: line 13: /var/root/Media/softupgrade/rm: Permission denied
upgrade.sh: line 14: /var/root/Media/softupgrade/ln: Permission denied
upgrade.sh: line 15: /var/root/Media/softupgrade/dd: Permission denied
upgrade.sh: line 16: /var/root/Media/softupgrade/fsck_hfs: Permission denied
upgrade.sh: line 17: /var/root/Media/softupgrade/reboot: Permission denied
#
l3xo January 25th, 2008 at 5:54 am
(Quote)
umm, everythings great, but 1.1.3 upgrade is not on installer, tried refreshing sources, no deal. Any ideas?
chaitanya January 25th, 2008 at 6:13 am
(Quote)
Hey,
Does this also UNLOCK…as in can u use non at&t sims…
I know its repetitive and ur main banner reads that but nun of the steps are leading to actually UNLOCKING the phone… is this part of the soft upgrade step?… also is anyone running a non at&t sim?
Ben January 25th, 2008 at 8:02 am
(Quote)
Backing up my applications now and trying this out.
I am on Fido in Toronto. So I am a NON-AT&T user.
I have unlocked using anySim.
SO! I’ll let you know if it all works. Settle all your questions.
Ben January 25th, 2008 at 9:11 am
(Quote)
7:28 - Hit ready to go
Uploading, still
Seriously, I said it would take a while. Just wait it out. It might be a half hour or something.
7:39 - iBrickr done
7:41 - Installer / 1.1.3
Mainscript execution failed!
7:42 start again (with itunes open in the background)
7:46 - Done patch
7:46 - Do you have to ask (Firmware downloaded last time)
7:47 - Patching 1.1.3 firmwre
7:47 - Ready to go
7:58 - Done
7:59 - Refreshing sources (installer)
8:00 - Install
FAILURE
Sorry guys no idea
TimB January 25th, 2008 at 9:27 am
(Quote)
I have tried this, and run through the iBrickr part with no problems. However, the Installer does not list the soft upgrade. According to Finder the 113_upgrade_image.bin file is in ~/Media/softupgrade, but it doesn’t show up in Installer (I am on v3.0b3). Any ideas would be gratefully received.
Neville Bartos January 25th, 2008 at 9:44 am
(Quote)
Nice article, but no mention of Jailbreak 1.1.3 application for Mac OS X users?
Jailbreak 1.1.3 software for Mac OS X available -> http://devices.natetrue.com/iphone/jb113.dmg
Jailbreak et déblocage de l’iphone / ipod touch en 1.1.3 | Korben's Blog January 25th, 2008 at 10:15 am
(Quote)
[...] Toutes les explications sont ici… [...]
sultan January 25th, 2008 at 11:14 am
(Quote)
I’m really tempted to try the upgrade but I need to see more success from others first. Good tutorial though. To you Neville Bartos just use a real OSX that actually gives you control over your machine and you could do the cool liittle things like this.
sandgrop January 25th, 2008 at 11:44 am
(Quote)
Did it, got an error at the very last stage but rebooted and phone works fine
chaitanya January 25th, 2008 at 12:46 pm
(Quote)
phone works fine? on what firmware and does it have all the features of 1.1.3 if its runnign that ? **fingers crossed***
UncleFester January 25th, 2008 at 12:56 pm
(Quote)
I’m having same problem after stage 19, I cannot find the soft upgrade anywhere in my system menu. I have tried this several times. I have downloaded the firmware update and I select “Find on disk” but it doesn’t ask me where the file is, it just goes straight onto the next part. I have “Download it from Apple” and waited while it installed on to iPhone and still no menu package…Any ideas?????
fidoiphone January 25th, 2008 at 1:12 pm
(Quote)
Hey I updated last night with my fido 1.1.2 unlocked anysim 1.2u iphone and it upgraded just fine…I’m now on 1.1.3 with everything running just fine (including ringtones)!!!
chaitanya January 25th, 2008 at 1:25 pm
(Quote)
thanx that was what i was waiting for.. gonna do it now…
labrat January 25th, 2008 at 1:27 pm
(Quote)
Thats because the unlock from 1.1.1 and 1.1.2 sticks when you follow this method. No need to run anySIM again
ALL the features work except hybrid view in Google Maps. Locate me works as well
For people having issues with not finding the package in installer, uninstall community sources and re-install it. Then Look under the System category in installer
chaitanya January 25th, 2008 at 1:56 pm
(Quote)
I dont have 1 gb of free space on my c drive can i extract it to another drive? :neutral:
Ben January 25th, 2008 at 2:26 pm
(Quote)
I have a possible solution for the step 22 problem, where it says “Mainscript execution failed!”
Not at home right now, will post again in about an hour and a half to see if it works.
Y34RZ3R0 January 25th, 2008 at 3:14 pm
(Quote)
I bought a 1.0.2 iPhone back in November and since updated and jailbroke to 1.1.1. I just soft updated straight to 1.1.3 and everything is working fine - all settings are still there and no files were deleted (’cept I had to reinstall all 3rd party apps) Still unlocked to Orange UK too. Definatey worth the hour it took.
chaitanya January 25th, 2008 at 3:27 pm
(Quote)
HEy y’all,
I face the Mainscript execution failed! problem too…..
I then pressed the home button and a circle came up….
It just kept rotating…. so i rebooted the phone and I ran the soft upgrade agian…
IT WORKED!!! Im running a functional 1.1.3 with features.!!
calls working sms working !!
ALthough the soft upgrade is still on my install list if i try to do it again it says i need 1.1.[12]..
Thanx soo much..
Ill get my phone back to use and update u all on the functionalit of features…
u can email me at chaitanyamuppala@gmail.com
Ben January 25th, 2008 at 3:39 pm
(Quote)
Okay, I found the fix for the Mainscript execution failed!
I started playing around in files.
Log into the phone using an FTP program. (I use Cyberduck on my Mac and WinSCP on my PC)
In your /private folder there are two more folders. /var and /etc
Go into /etc and there should be a file there called fstab
Open this in an editor. I did it on my PC using WinSCP (right clicking and using “Edit”). It opened in plain text so I assume TextEdit can open it as well.
The second line will probably read
“/dev/disk0s2 /private/var hfs rw,noexec 0 2″
Remove the “,noexec”
The line will now read
“dev/disk0s2 /private/var hfs rw 0 2″
(No quotations)
Save it or send it back overwriting it. (The file should have moved from something like 70 bytes to 65)
REBOOT THE PHONE!!!!
Go back to installer and badabang badaboom it installs.
I’m not sure about anything else yet…. I’m still in the middle of updating… but it’s gone farther than before… so I figured I’d post this…. I’ll be back if something else comes up.
labrat January 25th, 2008 at 4:07 pm
(Quote)
Thanks for that informative post Ben, i’m sure it will help many people
s2tephen January 25th, 2008 at 4:13 pm
(Quote)
Do’es this work with iphones using a turbosim or like
full January 25th, 2008 at 4:25 pm
(Quote)
turbosim work with 04.03.13G?
labrat January 25th, 2008 at 4:28 pm
(Quote)
If sim hacks like those worked in your previous 1.1.1 or 1.1.2 phones then they should work in this one as well.
Ben January 25th, 2008 at 4:34 pm
(Quote)
Big issue here,
Had someone use my method and had it work perfectly.
However on my OWN iPhone, I’m stuck on the apple logo during reboot.
My screen was garbled after the install I hit okay and then bang stuck on the boot screen. Not sure what to do. I’ll post again.
An-ka January 25th, 2008 at 4:41 pm
(Quote)
I here offer all respect and appreciation to everyone who worked very hard to achieve a great unlocking to the iPhone.
I have followed all steps in here till #22, the phone had re-booted as expected, but never came back to life. The silver apple logo stayed on the screen for so long. I tried to re-boot it again and again.. but it never reached the OS stage.
I had to restore back to 1.0.2 then update as usual to 1.1.1
I am afraid now to re-try updating to 1.1.3 , it took me 4 hours to get everything back to my previous status.
chaitanya January 25th, 2008 at 5:17 pm
(Quote)
edge doesn’t work…
email setting get wronged up…3
ring tones gone
waiting for someone to fix em
F.B January 25th, 2008 at 7:19 pm
(Quote)
I did all the steps as followed, after step 22 the phone rebooted as written above, but it is now stuck at the apple startup image and it wont come back to life, it is at a point where the pc does not detect it either, how do i fix this?
Ryan January 25th, 2008 at 9:18 pm
(Quote)
Hi, ipod touch 16gb.
followed everything, but on step 22 it installs Very quickly and then it reboots … then when i slide 2 unlock … nothing has changed
And i checked the file ben was talking about and i didnt need 2 change the string, it was already done :S
lol
Bob January 25th, 2008 at 9:34 pm
(Quote)
Will I get to keep all of my installed apps if I update?
ShotSkydiver January 25th, 2008 at 10:15 pm
(Quote)
just upgraded to 1.1.3 from an unlocked 1.1.1, worked perfectly.
EDGE is not working, everyone says hybrid view doesn’t work, it works for me. Unlock is still working, using prepaid AT&T SIM right now. Calls work, everything works! 
Pheddie January 25th, 2008 at 10:19 pm
(Quote)
same here dude…how did you get your phone to work again?
F.B January 25th, 2008 at 11:03 pm
(Quote)
Heres the procedure to go back from the boot-scrolling text-boot loop:
1. Put your iphone in the dock, with the USB cable disconnected from your computer.
2. Make sure the phone is off (The only way I got the phone to turn off is to hold the power button + the home button for like 15 seconds)
3. Once you know the phone is off, press and hold the HOME button then plug in the USB cable to your computer, keep holding the HOME button the whole time.
4. Next it should put It should now show the sync logo on your iphone and it should say “connect to itunes”.
5. Now restore your phone to 1.1.1, and you should be GOOD TO GO!
Good luck!!!
quoted from :
http://cre.ations.net/blog/pos.....k-released
migueL January 25th, 2008 at 11:34 pm
(Quote)
its the same with ipod touch, or need a special tool?
i have firmware 1.1.1
Ben January 26th, 2008 at 12:11 am
(Quote)
Took all day,
I restored to 1.1.1
Then to 1.0.2
Then back to 1.1.1 (1.1.2 didn’t work with it)
From 1.1.1 to 1.1.3
THEN 1.1 anysim (the old one from i.unlock.no)
It said it failed, but I rebooted and just popped in my sim and it just worked.
WOO!
chaitanya January 26th, 2008 at 12:12 am
(Quote)
To fix edge just go to Settings=>General=>Reset=>Reset Network Settings.
No email fix yet
No ringtones fix yet:)
Trevor January 26th, 2008 at 12:30 am
(Quote)
Worked great for me,
The only thing i wasn’t aware of is that summerboard and customize doesn’t work on 1.1.3 yet, so no themes right now.
Also lost my sms and calls list.
The Taskbar notifier doesn’t seem to be working right. I have no new txt, but the icon on the bar says i do. (Yes i restarted the phone)
Also when i connect my phone to iTunes, it doesn’t detect it…but that could be my computer needing a restart, or maybe my itunes is too old?
labrat January 26th, 2008 at 12:32 am
(Quote)
Guide updated! Now Hybrid view also works in 1.1.3
Enjoy Guys!
chaitanya January 26th, 2008 at 12:34 am
(Quote)
Hey y’all..
My hybrid works default it didn’t not work atall??!!
Trevor January 26th, 2008 at 1:27 am
(Quote)
For the ringtone, or email issue. Add http://sleepers.net/iphonerepo to your installer source, and install the Tweaks(1.1.3) > 1.1.3 Ringtone Fix. That work for me
chaitanya January 26th, 2008 at 4:22 am
(Quote)
Hey ,
theres an update for previous customers of iphone ringtone maker…. i can now load ringtones :):)
Rasul January 26th, 2008 at 4:22 am
(Quote)
hello
i have windows vista home permium and ibrickr113 can not be downloaded on my computer can some one help?
Shyam January 26th, 2008 at 7:57 am
(Quote)
I lost my built in ringtone sound after upgrade.
Please Help.
chaitanya January 26th, 2008 at 8:03 am
(Quote)
Hey ya’ll everything was fine for a day…
But out of the blue i cant send sms’s or calls..
but i can recieve…
HELP!!
chaitanya January 26th, 2008 at 8:27 am
(Quote)
OMG!!!! icant belive im such a loser…
Guess what– I was out of balance !!!
And i thought my phone was jacked …
shadeone January 26th, 2008 at 9:06 am
(Quote)
My 1.1.1 jailbroken iPhone isn’t updating to 1.1.3 properly. I run iBrickr and it downloaded all the files, patched them, and uploaded them. It then says to run 1.1.3 soft upgrade (which is now at 2.0 instead of 1.0) I hit “install”, it downloads, then says “Your iPhone is not ready to upgrade. See “More Info”. So I click on “More Info”, but its just a blank page.
Anyone know how to get past this?
Paul January 26th, 2008 at 1:40 pm
(Quote)
I followed all the steps with no problems until.
At reboot you get a “Edit Home Screen” message. Click the Dismiss button and you are now on 1.1.3:
After the reboot I did not get the message and my software is still 1.1.2
Any ideas
labrat January 26th, 2008 at 6:02 pm
(Quote)
The process didnt go through with ibrickr…make sure your ibrickr directory is on your desktop for it to work!
claudius January 26th, 2008 at 8:35 pm
(Quote)
i didnt uninstall my apps before i did the upgrade. after the upgrade everything is fine, but my apps are gone, but songs and contacts are still there. i followed this step
1) Install MobileFinder (if you already had it, uninstall it and install again)
2) Launch MobileFinder from the springboard.
3) Tap “Settings” and turn on “System File Access”
4) Tap “Finder” then “Up”. You should be in the file system now.
5) Navigate to private/var/root/Library/Installer/ and delete LocalPackages.plist
6) Reinstall Community Sources, BSD subsystem and OpenSSH (The username is mobile and the password is alpine).
7) Reinstall the rest of your 3rd party apps.
But when i use WinSCP, it gets me a error says “gethostbyname: unknow error” does anyone know what is wrong? please help
claudius January 26th, 2008 at 8:42 pm
(Quote)
i install some apps before i delete the file “LocalPackages.plist” inside installer folder, when i try to uninstall those apps afterward they are not on the uninstall list inside installer. any ideals???
Paul January 26th, 2008 at 9:08 pm
(Quote)
Yes it is on the desktop
I have Vista core 2 Duo with 1 gig of ram.
Ibrickr is run in compat mode.
Tried it a few times with no luck
chatvietnam January 27th, 2008 at 12:33 am
(Quote)
I’m finally can upgrade from 1.1.2 jailbreak to 1.1.3 and it works like firmware 1.1.3 but baseband still 4.2.13G nothing change on this.
chaitanya January 27th, 2008 at 2:06 am
(Quote)
Oh yeah i just realized that too..
Im running 1.1.3 but my modem fiormware is still 04.02.13_G..
any explanation?
Andrewmah23 January 27th, 2008 at 10:24 am
(Quote)
Cool thx for the help, I got the failed msg when i pressed the soft upgrade but when I pressed the home button the circle thing just came up and my phone restarted in 1.1.3
Kabir January 27th, 2008 at 11:35 am
(Quote)
Any one done this on a mac?
labrat January 27th, 2008 at 1:08 pm
(Quote)
the new baseband has no unlock yet so this method upgrades the firmware but keeps the old baseband so that the unlock stays
Thats why you saw the old baseband version
claudius January 27th, 2008 at 3:32 pm
(Quote)
does anyone else having problem with their SHH, after upgrade. i cant SHH into my phone, got a error message “gethostbyname: unknow error”
claudius January 27th, 2008 at 6:12 pm
(Quote)
anyone one knows how do i go back to version 1.1.2 or 1.1.1? my current state is 1.1.3 with 04.02.12_G firmware. a link to a guide would be great. thnaks
Jimev January 27th, 2008 at 6:50 pm
(Quote)
I had the same problem - Mainscript Execution fail - I followed Ben’s suggestion (using CyberDuck on a Mac):
Ben Says:
January 25th, 2008 at 3:39 pm (Quote)
Okay, I found the fix for the Mainscript execution failed!
I started playing around in files.
Log into the phone using an FTP program. (I use Cyberduck on my Mac and WinSCP on my PC)
In your /private folder there are two more folders. /var and /etc
Go into /etc and there should be a file there called fstab
Open this in an editor. I did it on my PC using WinSCP (right clicking and using “Edit”). It opened in plain text so I assume TextEdit can open it as well.
The second line will probably read
“/dev/disk0s2 /private/var hfs rw,noexec 0 2?
Remove the “,noexec”
The line will now read
“dev/disk0s2 /private/var hfs rw 0 2?
(No quotations)
Save it or send it back overwriting it. (The file should have moved from something like 70 bytes to 65)
REBOOT THE PHONE!!!!
Go back to installer and badabang badaboom it installs.
…and got the same result:
Ben Says:
January 25th, 2008 at 4:34 pm (Quote)
Big issue here,
Had someone use my method and had it work perfectly.
However on my OWN iPhone, I’m stuck on the apple logo during reboot.
Following the Master:
# Ben Says:
January 26th, 2008 at 12:11 am (Quote)
I restored to 1.1.1
Then to 1.0.2
Then back to 1.1.1 (1.1.2 didn’t work with it)
**Without installing Anysim**
From 1.1.1 to 1.1.3
THEN 1.1 anysim (the old one from i.unlock.no)
(Note that Installer.app won’t let you install AnySim 1.1)
**by installing BSD then SSH, then I dropped AnySim.app 1.1 on the Applications Folder (using CyberDuck), rebooted and ran it**
as for Ben, I got:
It said it failed, but I rebooted and just popped in my sim and it just worked.
WOO!WOO!
Thanks for the inspiration Ben!
Jimev
jim January 27th, 2008 at 8:08 pm
(Quote)
oh yes sorry it will just follow instructions above
Manshu January 28th, 2008 at 12:33 am
(Quote)
Using this method, I now have an unlocked & 1.1.3 jailbroken iPhone.. the only problems I have are:
The EDGE icon won’t appear (it still works.. just doesnt display the E icon in the status bar at the top)
LocateMe won’t work… even inside the application from installer.. won’t work for some reason..
Any help would be appreciated..
Thanks
Jimev January 28th, 2008 at 5:29 am
(Quote)
Update! After performing the install process for the second time (no mail. no incoming ring sound, no ring sound test, no EDGE) The mail problem appears to have disappeared - it’s now functional; the most annoying is that an incoming call only produces a vibration - no ringtone. Otherwise the phone is functional, and works on FarEastTone here in Taiwan. Looks like the silent switch has been turned off in software - anyone know how to fix that?
Cheers.
Manshu January 28th, 2008 at 6:13 pm
(Quote)
Jimev, I believe there is a fix available for the ringtone problem.. add the source “http://sleepers.net/iphonerepo”.
The fix is under “1.1.3 Tweaks” or similar.. it worked for me..
As for my problem of no EDGE, I am going to try this process again and see if it works for me.
Good luck.
George January 29th, 2008 at 10:01 pm
(Quote)
Hi, IMPORTANT FOR ALL THAT HAVE THIS ERROR ” Main script execution error ”
this is a big thing, do not panic if you get this message ” Main script execution error “, is ok…just leave the phone like that and after 10 or 15 minutes press the home button….YOU DO NOT HAVE TO RESTORE AND DO IT AGAIN…so after you are on the home screen, stay for 1 minute and press the Installer button…then a spinning circle will come out for about 10 minutes max…and after thAT your phone will restart and you will be on 1.1.3!
SO DON’T WASTE YOUR TIME AND RESTORE YOU DON’T HAVE TO…GREAT RIGHT….I NOTICE THAT BY MISTAKE!!
FUHRER January 29th, 2008 at 11:14 pm
(Quote)
Great…!!! Im from México City and i have a Iphone 1.1.1 OTB with jailbreak and modem firmware 04.01.13_G, i unistall all my apps (including Summerboard, Customize and Categorize), i update the Installer and the BSD Subsystem before the upgrade…. then i make alll the process of upgrade to 1.1.3 using this tutorial… and like magic… 1.1.3 with all the features working!!! Contact me if you like in youtube serch user: “bishopacm”
Thanks to all the people who take the time to make us a happy iphone owners…!!!
chatvietnam January 29th, 2008 at 11:52 pm
(Quote)
Anyone know how to send ringtones into IPhone.
chatvietnam February 2nd, 2008 at 12:02 am
(Quote)
Is anyone know how to delete bluetooth device headset in Iphone.
scheezo February 2nd, 2008 at 2:29 am
(Quote)
i experienced the same problem. this is just easy. after jailbreaking 1.1.1, install the ibrickr. after installing soft upgrade.
when it says cannot ready to upgrade, simple TURN OFF-ON your iphone. no need to reinstall the 1.1.1 again. just run the ibrickr one more time and soft upgrade and you have 1.1.3!!!
Stella February 3rd, 2008 at 6:52 pm
(Quote)
I followed this procedure and although thejailbreak seemed to worked out ok, when I put the anySim in the phone I got a “sim could not be detected” message. I have tried the whole procedure from the beggining TWICE with no luck. No I think the best think to do is to get mu iphone back to virgin state (1.1.2). Any idea how to do that? PLEASE help
chatvietnam February 4th, 2008 at 1:11 am
(Quote)
How to copy phone book from sim to iphone?
chatvietnam February 5th, 2008 at 11:14 pm
(Quote)
Official Jailbreak 1.1.3 work better than 1.1.3 form Nate True
George February 6th, 2008 at 6:09 pm
(Quote)
I bought a IPHONE with already 1.1.3 version can i go ahead and downgrade it to 1.1.2? if so please help me out
kity February 8th, 2008 at 12:06 am
(Quote)
hai, i have iphone 1.1.3.when i follow step 7, it say that Your phone already has 1.1.3 installed! You will have to downgrade to 1.1.1 or 1.1.2 before continuing. what should i do because i want use t-mobile simcard in my iphone. please give me the solutins. thanks
Andrew February 8th, 2008 at 7:50 am
(Quote)
i have an iphone with 1.1.2 instald
but i updated it to 1.1.3 from i tunes, its locked,
is there a way to unlock it?
can someone please help me out ?
Patrick Conner February 8th, 2008 at 9:00 pm
(Quote)
I updated to 1.1.2 and jailbroke it and installed installer and all the updates to it and open ssh and and everything and updated using official 1.1.2 updater and it updates and reboots and goes to the main screen. And installer is there.. I click on it and it said to update installer again so I did and then when it reboots it takes me to a screen with a slide bar to the dial pad and itunes says it wont detect it and to take it to an apple store. So I do it again and I installed this time the sync fix and rebooted the phone and it did the same thing.. Is there anything anything to do.. come on this has to be easier then all this CRAP all the time… Why cant someone that honestly knows what they are doing make a fix and it work and people pay him or her everytime they want to update but at least they know it will work.. What can I do now… please email me and let me know… pdconner@comcast.net
Patrick Conner February 9th, 2008 at 11:58 pm
(Quote)
Isnt it funny that all these people (DEV TEAM) and erica are making programs for the 1.1.3 and updating things to work for that version yet no one YET has a great way to update to 1.1.3 that works.. I dont understand it… ERICA said she is not doing 1.1.2 programs any more but yet they dont want to help people get to 1.1.3
i thought i bricked my iphone. « colmmcmullan March 17th, 2008 at 7:07 pm
(Quote)
[...] out of it. somehow. they didn’t provide much detail. typical.then (hallelujah!) i found this: http://www.haklabs.com/2008/ja.....nt-22996to break the loop and restore your iphone you need to do the [...]